Skip to content
Menu
Skip to product information

STAYBULL MULTI-BASE™ LADDER & ROOF STABILIZER

$349.00 USD

PRE‑ORDER: WE’RE PUTTING THE FINISHING TOUCHES ON THE FIRST PRODUCTION RUN. ORDERS START TO SHIP LATE JANUARY 2026. DUE TO HIGH INITIAL DEMAND, LEAD TIMES MAY EXTEND. WE’LL KEEP YOU UPDATED AS WE MOVE THROUGH THE PROCESS.

The STAYBULL MULTI‑BASE™ is a patented roof wedge and anti‑slip ladder base that multiplies your ladder’s footprint, locks it down on flat or sloped surfaces, and helps stop kick‑out where ladders normally slip.
With over 300 sq in of gripping surface, load‑distributing geometry, and BullGrip™ traction pads that suction under pressure, the MULTI‑BASE™ gives you a stable, predictable platform on hardwood, tile, decking, shingles, metal roofing, uneven yards, and pitched roofs up to 12/12.

Turn any pitch into a stable workspace.
The MULTI‑BASE™ locks onto shingles and roofing surfaces to create a secure, level platform exactly where you need it. Sit, kneel, or stand with confidence - or use it as a steady perch for tools, fasteners, hardware, or even a gallon of paint. Whether you’re installing, repairing, painting, or performing maintenance, the MULTI‑BASE™ transforms sloped roofs into safe, controlled working zones that keep your hands free and your footing solid.

Work solo with confidence. Protect the surfaces you’re on. Replace multiple single‑purpose tools with one rugged, American‑built solution that stays put under pressure.

Choose your traction pads:

  • BullGrip™ Traction Pads (Pre‑Installed) – durable, micro‑suction, general‑purpose pads optimized for smooth, slick, or hard surfaces such as hardwood, tile, laminate, composite decking, finished flooring, and most common exterior surfaces

  • BullGrip™ Metal Pads (Optional Upgrade) – engineered for high‑friction grip on any metal surface, including standing‑seam and corrugated roofing. The MULTI‑BASE™ itself spans 12" and 16" O.C. ribs to sit flat and stable on metal profiles

Load Rating:
Supports up to 375 lbs (combined user + tools) when used on flat, appropriate surfaces.
When used on sloped or roofed surfaces, overall stability depends on pitch, surface conditions, pad type, and proper ladder setup. Always assess conditions and follow all ladder safety guidelines.

Made in the USA. Patented. Built for real jobsites.


The STAYBULL MULTI‑BASE™ works with most standard extension ladders, step ladders, and combination ladders when used according to the ladder manufacturer’s instructions. It’s built for real‑world surfaces, including:

  • Smooth interior floors (hardwood, tile, laminate)
  • Composite decking and finished exterior surfaces
  • Pavers, patios, and flat outdoor surfaces
  • Sloped yards, uneven terrain, and loose ground
  • Asphalt and architectural shingles
  • Standing‑seam and corrugated metal roofing (with BullGrip™ Metal Pads installed)
  • Pitched roofs up to 12/12 when used as a working platform

Note: The MULTI‑BASE™ is a stability aid - not a fall‑arrest device. Always follow proper ladder setup and jobsite safety practices.

Included:

  • STAYBULL MULTI‑BASE™ (fully assembled)
  • BullGrip™ Traction Pads (Pre‑Installed) - General‑purpose pads engineered for high‑friction grip on a wide range of surfaces, including hardwood, tile, laminate and other finished flooring, wood and composite decking, asphalt shingles, wood shakes, concrete, pavers, and most common exterior surfaces.

    Micro‑suction texture helps the pads “lock down” under pressure, while the high‑durability compound resists wear across demanding jobsite conditions.

Optional Upgrade:

  • BullGrip™ Metal Pads - designed for maximum grip on standing‑seam, corrugated, and other metal roofing profiles. Swap pads when switching between general surfaces and metal roofing.

Footprint:

  • Over 300 sq in of gripping surface

Load Rating:

  • Supports up to 375 lbs (combined user + tools) on flat, appropriate surfaces
  • Stability on sloped surfaces depends on pitch, conditions, pad type, and proper ladder setup

Construction

  • Roto‑molded composite body - thick‑walled, impact‑resistant construction built to handle real jobsite abuse without cracking or deforming.
  • American‑built manufacturing - consistent quality, tight tolerances, and materials chosen for durability, not shortcuts.
  • Molded‑in ladder‑feet backstops - helps keep ladder feet from walking or shifting under load.
  • Aggressive anti‑slip tread - provides additional foot traction when stepping on or off the ladder.
  • Heavy‑duty hook‑and‑loop pad attachment system - secure, field‑serviceable pad swaps with no tools required.
  • Micro‑suction pad interface - pads “lock down” under pressure for added stability on smooth or slick surfaces.
  • High‑durability pad compound - resists wear on abrasive surfaces like concrete, pavers, and rough exterior materials.

Dimensions & Weight

  • Length: 33 in
  • Width: 16 in
  • Height: 7.5 in
  • Weight: 13 lb.

Ladder Fit Range

  • Maximum Outside Ladder Width: 29.5 in
  • (Measured from the outer edge of one ladder foot to the outer edge of the other)
  • Minimum Inside Ladder Width: 11.5 in
  • (Distance between the inner faces of the ladder rails)

If your ladder falls within this width range, it will seat properly into the MULTI‑BASE™ recessed ladder pockets.

Supported Ladder Types

  • Step ladders
  • Extension ladders
  • Combination ladders
  • Telescoping ladders

Using the MULTI‑BASE™ is straightforward and built for speed:

  • Place the MULTI‑BASE™ on a clean, appropriate surface, using the correct side of the device for the task at hand.
  • Set your ladder feet into the recessed pockets labeled “PLACE LADDER HERE,” engaging the molded‑in ladder‑feet backstops and aggressive anti‑slip tread to help lock in both the ladder and your footing.
  • Load it up - BullGrip™ pads compress and “lock down” under pressure to help keep the unit planted.
  • When using the MULTI‑BASE™ as a roof‑leveling wedge, keep your weight centered vertically as much as possible (avoid leaning uphill into the slope). The upper shelf/heel ledge provides a secure place for your foot on pitched surfaces.
  • Mount the ladder only after verifying stability - your ladder must be properly set up, stable, and compliant with the ladder manufacturer’s instructions before you climb.
  • To reposition, unload the ladder and slide or move the MULTI‑BASE™ to the next work area.

Pad installation & maintenance:

  • Pads attach using a heavy‑duty hook‑and‑loop system. Press firmly to secure.
  • Swap pads when worn or when switching between general surfaces and metal roofing.
  • Keep pads clean and free of debris for maximum grip and predictable performance.
  • Replace pads when traction is visibly reduced, damaged, or contaminated.

Safety & care guidelines:

  • Inspect the MULTI‑BASE™ and traction pads before each use.
  • Use only on surfaces appropriate for the pad type installed.
  • Do not exceed the 375 lb combined user + tools rating on flat, appropriate surfaces.
  • On sloped or roofed surfaces, stability depends on pitch, surface conditions, pad type, and proper ladder setup.
  • Do not use the MULTI‑BASE™ as a fall‑arrest device or as a substitute for proper ladder setup.
  • The MULTI‑BASE™ provides a stable platform for sitting, standing, kneeling, stepping, or staging tools when used as intended.
  • Store the MULTI‑BASE™ out of extreme heat, cold, and prolonged UV exposure to maximize pad life and overall material longevity.
  • If the device ever feels unstable, not secure, or compromised, stop and reassess before climbing. Stability comes first.
  • The MULTI‑BASE™ improves stability, but safe ladder setup and responsible use are always required.

Fast, Free Shipping

Every MULTI‑BASE™ ships free within the continental United States. No minimums, no surprises.

Quick Processing

Orders typically ship within 1–2 business days. Tracking is sent the moment your package is on the move.

Hassle‑Free Returns

If your MULTI‑BASE™ arrives damaged or defective, we’ll replace it at no cost.

Return Eligibility

Unused MULTI‑BASE™ units in original condition may be returned according to our Shipping & Returns Policy found in the site footer.

Need Help?

Reach out anytime - we’re here to keep your MULTI‑BASE™ performing at its best.

We build gear that earns its keep. If your MULTI‑BASE™ arrives with a manufacturing defect, we’ll make it right - fast.

The MULTI‑BASE™ is engineered for long‑term durability under real job‑site conditions. It’s built to take abuse, handle slopes, grip slick surfaces, and keep showing up day after day — and it’s not even on payroll.

This isn’t a disposable gadget.

This is a reloadable, rebuildable, American‑made platform designed to outlast the job.

No fine print. No nonsense. Just STAYBULL TOOLS®

STAYBULL MULTI-BASE™ LADDER & ROOF STABILIZER

STAYBULL MULTI-BASE™ LADDER & ROOF STABILIZER

$349.00

SEE IT IN ACTION

WHAT MAKES THE MULTI‑BASE™ DIFFERENT

Forget the cheap rubber mats, the crumbling foam wedges, the scrap‑wood shims, and the “hey man, can you hold this ladder for a sec?” routine. The MULTI‑BASE™ replaces all of it. No more tying off your ladder to whatever’s nearby. No more praying your setup doesn’t shift. Just a stable, predictable platform that lets you work the way you should’ve been able to all along.

Dual‑Sided Stability

One side is built for flat ground and moderate slopes up to 8/12. Flip it over and you’ve got a secure stance on mid‑to‑steep pitches up to 12/12. One tool, two working angles - no extra leveling blocks, no improvising.

Engineered Wedge Geometry

The internal geometry distributes load evenly across all traction pads, helping the MULTI‑BASE™ stay planted under pressure instead of rocking, twisting, or shifting.

Locked‑In Ladder Positioning

Recessed pockets with integrated backstops and aggressive anti‑slip tread help keep ladder feet from wandering. Your ladder gets a defined, repeatable placement every time.

Confident Footing on Sloped Surfaces

The anti‑slip tread continues up onto the upper shelf/heel ledge, giving you a secure foothold when standing, kneeling, or working on pitched roofs.

Side‑Slope Ladder Support

The wedge profile lets you correct side‑to‑side lean on sloping yards. Set the MULTI‑BASE™ under the low side and it stops downhill drift, tipping, and wandering. No digging, no scraps of wood - just a straight, stable ladder on uneven ground.

XL Surface Contact Area

A wide, load‑spreading footprint increases grip and stability on everything from composite decking to shingles to interior floors - more contact area means more control.

Grab‑and‑Go Handling

Molded‑in handles on the top and sides make it easy to carry, position, and reposition. There’s even a paint‑can recess for quick staging during exterior work.

Metal Roof Ready

Integrated 12" and 16" standing‑seam slots on the underside let the MULTI‑BASE™ bridge over metal‑roof ribs, creating a flat, stable platform where ladders normally rock or slide.

Reloadable Traction System

Replaceable BullGrip™ traction pads let you refresh grip as needed or swap pad types for different surfaces. No disposable gimmicks - just reload and keep working.

Durable Hook‑Plate Attachment

Molded hook plates on the bottom lock the pads in place using a heavy‑duty hook‑and‑loop system. Pads stay put under load but swap out in seconds when needed.

READY TO CONQUER YOUR CLIMB?

LOCK IT DOWN NOW →

Your Cart

Your Cart is empty
Let's fix that

You might like...

Search our store