FAILURE TO READ AND FOLLOW ALL SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.

THE STAYBULL MULTI‑BASE™ IS NOT A FALL‑ARREST OR FALL‑PREVENTION DEVICE.

The STAYBULL MULTI‑BASE™ is engineered to enhance stability when used correctly, but it must always be operated in accordance with ladder manufacturer instructions, jobsite safety requirements, and the guidelines below. No stability device can eliminate all risk.

Still tough.
Still safe.
Still STAYBULL.

1. INSPECTION BEFORE USE

Before each use:

• Inspect the STAYBULL MULTI‑BASE™ and all traction pads for cracks, wear, deformation, or missing components.
• DO NOT USE the product if any part is damaged, loose, or missing.
• Replace worn traction pads immediately.
• Confirm that all surfaces of the MULTI‑BASE™ are clean and free of oil, mud, snow, or debris.

Users are responsible for ensuring the product is in safe working condition before every use.

2. SURFACE CONDITIONS

For safe operation:

• Use only on clean, dry, stable surfaces.
• Traction pads may not function properly if wet, dirty, icy, oily, or contaminated.
• DO NOT USE on excessively steep, slippery, unstable, or debris‑covered surfaces.
• Jobsite conditions can change rapidly; reassess traction and stability frequently.
• Extreme temperatures, moisture, and weather conditions may reduce traction and overall performance.

If adequate traction cannot be achieved, DO NOT USE the device.

3. PROPER USE

The STAYBULL MULTI‑BASE™ is designed to:

• Support extension and straight ladders
• Support materials and tools
• Provide a stable working platform on sloped or uneven ground

Usage requirements:

• Maximum weight capacity: 375 lbs, including user, tools, and materials.
• Confirm adequate grip between the traction pads and the surface before climbing.
• Ensure ladder feet rest fully and securely within the designated contact areas.
• USE ONLY AS INTENDED. Follow all jobsite, ladder setup, and roof‑access safety guidelines.
• Misuse, improper setup, or unsafe operation may result in injury.

The MULTI‑BASE™ does not compensate for improper ladder setup or unsafe climbing practices.

4. DIRECTIONS FOR USE

1. PREPARE

Choose the correct traction pad for the job:

• Black General‑Purpose Pad —Durable and long‑lasting for most surfaces.
• Gray Metal Roofing Pad — Specifically designed for metal roofing applications.
• Replace traction pads when worn or damaged.

2. PLACEMENT

• Position the MULTI‑BASE™ only on stable, clean, and dry surfaces.
• For sloped surfaces, orient the tool using the correct side to create a level base.

3. STABILITY CHECK

• Before fully loading the device, apply light downward pressure to confirm traction.
• If any slipping, shifting, or movement occurs, DO NOT USE the device.

4. LADDER SETUP

• Ensure ladder feet fit securely within the designated areas.
• Follow all ladder manufacturer instructions and OSHA/ANSI ladder safety guidelines.
• A spotter may be required depending on jobsite conditions.

5. AFTER USE & STORAGE

• Store the MULTI‑BASE™ in a clean, cool, dry environment.
• Clean traction pads with mild soap and water; allow to fully air‑dry before next use.
• Do not store in direct sunlight or extreme temperatures for prolonged periods.

6. USER RESPONSIBILITY

By using the STAYBULL MULTI‑BASE™, the user acknowledges:

• They have read and understand all safety instructions.
• They are responsible for proper ladder setup and safe operation.
• They will use the product only as intended and only under safe conditions.
• They understand that no device can eliminate all risk of slips, falls, or instability.

7. REPLACEMENT LABELS & PARTS

THE SAFETY LABEL MUST BE REPLACED IF DAMAGED, WORN, OR ILLEGIBLE.

Replacement traction pads, labels, and components are available at:

STAYBULLTOOLS.COM

8. LIMITATION OF LIABILITY

By using the STAYBULL MULTI‑BASE™, the user agrees that:

• STAYBULL TOOLS®, the inventor, designers, manufacturers, component manufacturers, suppliers, distributors, retailers, marketers, agents, and any affiliated or successor entities are not liable for any injury, damage, loss, or claim arising from:
• improper use
• misuse
• unsafe ladder practices
• failure to follow instructions
• operation under unsafe jobsite conditions
• environmental hazards
• or any deviation from intended use
• The user assumes all risks associated with ladder use, jobsite hazards, environmental conditions, and failure to follow required safety procedures.
• The MULTI‑BASE™ is not a fall‑arrest, fall‑prevention, or personal protective device.
• No party listed above shall be held responsible for injuries resulting from slips, falls, overreaching, improper ladder setup, or unsafe behavior.
• In no event shall STAYBULL TOOLS® or any related party be liable for incidental, consequential, indirect, or special damages of any kind.

Use of the product constitutes acceptance of these terms.